# **********************************************************************
#
# Copyright (c) 2003-2016 ZeroC, Inc. All rights reserved.
#
# This copy of Ice is licensed to you under the terms described in the
# ICE_LICENSE file included in this distribution.
#
# **********************************************************************

#
# Select an installation base directory. The directory will be created
# if it does not exist.
#

!if "$(PREFIX)" == ""
prefix			= C:\Ice-$(VERSION)
!else
prefix			= $(PREFIX)
!endif

#
# Define OPTIMIZE as yes if you want to build with optimization.
# Otherwise the Ice extension is built with debug information.
#

OPTIMIZE		= yes

#
# Specify your C++ compiler. The only values currently supported to
# build IcePHP are VC110 (PHP 5) and VC140 (PHP 7).
#
CPP_COMPILER		= auto

#
# Determines whether the extension uses PHP namespaces (requires
# PHP 5.3 or later).
#
!if "$(USE_NAMESPACES)" == ""
USE_NAMESPACES		= no
!endif

#
# Set PHP_HOME to your PHP source directory.
#
!if "$(PHP_HOME)" == ""
PHP_HOME		= C:\php-5.6.26
!endif

#
# Set PHP_BIN_HOME to your PHP binary installation directory.
#
!if "$(PHP_BIN_HOME)" == ""
!if "$(PROCESSOR_ARCHITECTURE)" == "AMD64"
PHP_BIN_HOME	 = $(PROGRAMFILES) (x86)\PHP
!else
PHP_BIN_HOME	 = $(PROGRAMFILES)\PHP
!endif
!endif

#
# Set PHP_ZTS to "no" (or comment it out) to disable Zend Thread Safety.
#
!if "$(PHP_ZTS)" == ""
PHP_ZTS			= yes
!endif

#
# If third party libraries are not installed in the default location
# or THIRDPARTY_HOME is not set in your environment variables then
# change the following setting to reflect the installation location.
#
!if "$(THIRDPARTY_HOME)" == ""
!if "$(PROCESSOR_ARCHITECTURE)" == "AMD64"
THIRDPARTY_HOME	 = $(PROGRAMFILES) (x86)\ZeroC\Ice-$(VERSION)-ThirdParty
!else
THIRDPARTY_HOME	 = $(PROGRAMFILES)\ZeroC\Ice-$(VERSION)-ThirdParty
!endif
!endif


# ----------------------------------------------------------------------
# Don't change anything below this line!
# ----------------------------------------------------------------------

#
# Common definitions
#
ice_language     = php
ice_require_cpp  = yes
slice_translator = slice2php.exe

!if exist ($(top_srcdir)\..\config\Make.common.rules.mak)
!include $(top_srcdir)\..\config\Make.common.rules.mak
!else
!include $(top_srcdir)\config\Make.common.rules.mak
!endif

libdir		= $(top_srcdir)\lib
install_phpdir	= $(prefix)\php
install_libdir	= $(prefix)\php

!if exist ($(top_srcdir)\..\cpp\config\Make.rules.msvc)
!include $(top_srcdir)\..\cpp\config\Make.rules.msvc
!else
!include $(top_srcdir)\config\Make.rules.msvc
!endif

!if "$(CPP_COMPILER)" == "VC110"
php_version		= php5
!else if "$(CPP_COMPILER)" == "VC140"
php_version		= php7
!else
!error Invalid CPP_COMPILER setting: $(CPP_COMPILER). Must be set to VC110 or VC140.
!endif

libsuff         = $(x64suffix)

!if "$(OPTIMIZE)" != "yes"
LIBSUFFIX       = $(LIBSUFFIX)d
RCFLAGS		= -D_DEBUG
!endif

#
# Import libraries are located automatically
#
ICE_LIBS	=

!if "$(ice_src_dist)" != ""
ICE_CPPFLAGS    = -I"$(ice_cpp_dir)\include"
!if "$(ice_cpp_dir)" == "$(ice_dir)\cpp"
ICE_LDFLAGS	= /LIBPATH:"$(ice_cpp_dir)\lib"
!else
ICE_LDFLAGS	= /LIBPATH:"$(ice_cpp_dir)\lib$(libsuff)"
!endif
!else
ICE_CPPFLAGS    = -I"$(ice_dir)\include"
ICE_LDFLAGS     = /LIBPATH:"$(ice_dir)\lib$(libsuff)"
!endif

slicedir        = $(ice_dir)\slice

!if "$(PHP_ZTS)" == "yes"
PHP_LIB_PREFIX	= $(php_version)ts
!else
PHP_LIB_PREFIX	= $(php_version)
!endif

!if "$(OPTIMIZE)" != "yes"
PHP_LDFLAGS	= /LIBPATH:"$(PHP_BIN_HOME)"
PHP_LIBS	= $(PHP_LIB_PREFIX)_debug.lib
PHP_ZEND_DEBUG	= 1
!else
PHP_LDFLAGS	= /LIBPATH:"$(PHP_BIN_HOME)\dev"
PHP_LIBS	= $(PHP_LIB_PREFIX).lib
PHP_ZEND_DEBUG	= 0
!endif

PHP_CPPFLAGS	= -I"$(PHP_HOME)" -I"$(PHP_HOME)\main" -I"$(PHP_HOME)\TSRM" -I"$(PHP_HOME)\Zend" -DPHP_WIN32 -DZEND_WIN32 -DZEND_DEBUG=$(PHP_ZEND_DEBUG) -DWIN32
!if "$(PHP_ZTS)" == "yes"
PHP_CPPFLAGS	= $(PHP_CPPFLAGS) -DZTS
!endif

ICECPPFLAGS	= -I"$(slicedir)"
SLICE2PHPFLAGS	= $(ICECPPFLAGS) $(SLICE2PHPFLAGS)

!if "$(USE_NAMESPACES)" == "yes"
CPPFLAGS	= $(CPPFLAGS) -DICEPHP_USE_NAMESPACES
SLICE2PHPFLAGS	= $(SLICE2PHPFLAGS) -n
!endif

!if "$(ice_src_dist)" != ""
!if "$(ice_cpp_dir)" == "$(ice_dir)\cpp"
SLICE2PHP	= $(ice_cpp_dir)\bin\slice2php.exe
SLICEPARSERLIB	= $(ice_cpp_dir)\lib\slice.lib
!if !exist ("$(SLICEPARSERLIB)")
SLICEPARSERLIB	= $(ice_cpp_dir)\lib\sliced.lib
!endif
!else
SLICE2PHP	= $(ice_cpp_dir)\bin$(x64suffix)\slice2php.exe
SLICEPARSERLIB	= $(ice_cpp_dir)\lib$(x64suffix)\slice.lib
!if !exist ("$(SLICEPARSERLIB)")
SLICEPARSERLIB	= $(ice_cpp_dir)\lib$(x64suffix)\sliced.lib
!endif
!endif
!else
SLICE2PHP	= $(ice_dir)\bin\slice2php.exe
SLICEPARSERLIB	= $(ice_dir)\lib\slice.lib
!endif

EVERYTHING	= all clean install depend
EVERYTHING_EXCEPT_INSTALL = all clean depend

.SUFFIXES:
.SUFFIXES:	.cpp .obj .php .res .rc .d .ice

DEPEND_DIR = .depend.mak

depend::

!if exist(.depend.mak)
depend::
	@del /q .depend.mak

!include .depend.mak
!endif

!if "$(OBJS)" != ""

OBJS_DEPEND = $(OBJS:.obj=.d)
OBJS_DEPEND = $(OBJS_DEPEND:.\=.depend.mak\)

depend:: $(OBJS_DEPEND)

!endif

!if "$(SLICE_SRCS)" != ""

depend:: $(SLICE_SRCS:.ice=.d)

$(SLICE_SRCS:.ice=.php): "$(SLICE2PHP)" "$(SLICEPARSERLIB)"

all:: $(SLICE_SRCS:.ice=.php)

clean::
	del /q $(SLICE_SRCS:.ice=.php)

!endif

.ice.php:
	"$(SLICE2PHP)" $(SLICE2PHPFLAGS) $<

.ice.d:
	@echo Generating dependencies for $<
	@"$(SLICE2PHP)" $(SLICE2PHPFLAGS) --depend $< | \
	cscript /NoLogo $(top_srcdir)\..\config\makedepend-slice.vbs $(*F).ice

.cpp{$(DEPEND_DIR)}.d:
	@echo Generating dependencies for $<
	@$(CXX) /E $(CPPFLAGS) $(CXXFLAGS) /showIncludes $< 1>$(*F).i 2>$(*F).d && \
	cscript /NoLogo $(top_srcdir)\..\config\makedepend.vbs $(*F).cpp $(top_srcdir)
	@del /q $(*F).d $(*F).i

.cpp.obj::
	$(CXX) /c $(CPPFLAGS) $(CXXFLAGS) $<

.rc.res:
	rc $(RCFLAGS) $<

clean::
	del /q $(TARGETS) *.obj *.bak

all:: $(TARGETS)

install::